Which RC Airplane Kit Should I Get?
Building an RC airplane from a kit involves the assembly of all the parts, down from its structure to its engine. RC airplane kits that can be considered to be well-designed should include a set of plans, an instructional guide, and even some hardware.
Before getting an RC airplane kit, go ask yourself if you would rather spend more time building the airplane than actually flying it. If your answer is no, then go get yourself a RTF RC airplane kit. The acronym that it stands for, which is Ready-to-Fly, is what it truly means: you can fly the airplane once you take it out of its box and have completed the some last adjustments.
If you do not have any building skills and the luxury of time of build these RC airplanes, try those models that are prebuilt in the factories. Not only are you sure that your airplane is not going to fall apart in midair, but can you get right into enjoying your airplane’flight.
[phpbay]RC airplane kits, 5, "", ""[/phpbay]
Though, if you think you would enjoy putting the parts together as much as flying the aircraft, then an ARF RC airplane kit best suits your need for a challenge. ARF stands for “Almost Ready-to-Fly”. Most of the major structures have already been built; all you need to do is do some final assembly on those structures, then assemble the engine, radio, and a few other hardware pieces, and you’re airplane’s good for flying!
One of the SIG airplane kits have changed the way how people see aerobatic airplanes. This is known as Somethin’ Extra. This kit was cleverly designed and successfully executed because of its precise laser-cut parts and CAD engineering. Another easy to build airplane kit is the Great Planes PT-40 Mark II. This kit also comes with a full-sized plan and comprehensive instructional guide.

Building an RC Airplane from a Kit
Many people have turned to remote control toys as their pastime from the hassles and tussles of life. These remote controlled toys, better known as RCs, come in the form of airplanes, racing cars, trucks, or even boats.
It is said that RC airplanes has more variety than any other hobby because of the wide selection of models. An enthusiast can look for RC airplane kits that suit his skill level, for building and for flying.
Building an aircraft is easier these days with the help of RC airplane kits available out in the market. It won’t take days in and out to completely build a RC airplane. The RC airplane kits usually come in as a Ready-to-Fly airplane or as an Almost Ready-to-Fly airplane. There are also some airplane kits that are Ready-to-Cover.
The duration for each kit greatly varies; with the Ready-to-Fly airplanes having the shortest build time (this can be ready in about 30 minutes), the Almost Ready-to-Fly airplanes takes around 10 to 30 hours to finish, while it would take 3 to 6 days to complete a Ready-to-Cover airplane.
The duration it takes to assemble each of the kits mentioned above isn’t the only distinction they have from one another. It’s more of the effort that will be exerted in learning the plans, and in trying to understand the instruction manuals, before actually putting the parts together.
You can already probably find the tools needed in putting up the parts from the RC airplane kits inside your home, plus any adhesive material that would hold the parts together such as glue.

All About RC Airplanes
Remote controlled airplanes, most commonly known as RC airplanes are not all that expensive and have grown to be a popular hobby for years now. The feeling of flying an RC airplane versus a real airplane is not that different even though the sizes of the aircraft greatly differ and the actual location of the pilots. This is due to the fact that these RC airplanes have been designedmatch an aircraft’s flight.

What’s great about these toys is that you can customize them as you please. It’s also a fun and exciting way to spend your weekends out in an open field with your RC airplane flying around the blue sky.
Any regular hobbyist who loves building their own toys can start creating an RC airplane of their own by getting a RC airplane kit. There are two models or kits of RC airplanes available out in your local hobby shops, or even on the net: the Ready-to-Fly (RTF) ones, which doesn’t require any assembly, and the Almost Ready-to-Fly (ARF) models, that require a lot of construction skills.
RTF RC airplane kits are best if you are interested to get into this hobby. You won’t have to worry about getting the parts right, all you need to do is enjoy first flight right after you take the plane out of its box. It’s best to ask an experienced flyer for help, rather than crashing your plane into a tree.
A radio control system controls this exceptional toy for the big boys.  The RC aircraft should come with a receiver. You will be able to control speed and direction of your RC plane using a transmitter. The plane’s propeller runs either by a battery (electric motor) or by fuel (gas engine). So, go ahead and get yourself a RC airplane kit, and venture into the world of flying!

Remember how I was telling you about my feeble and abortive efforts to build models in my younger days?  Well, folks have gotten a lot more scientific about it now.  I came across a web site Called "Building Scale Model Airplanes.  There is a lot of detailed information there. Here is a link to the site:  http://buildingscalemodelaircraft.com/construction1.htm

Now, take a look at how organized he starts out.  It is all I can do to read the table of contents much less read the manual.  Besides, as I remember with the kits I dealt with, there were not a lot of instructions.

The first thing you will want to do is to look for references (photos, history, etc) about the model you are going to build. Next, read the instructions and give special attention to the assembly sequence. Decide about the color scheme, markings, details, time period and modifications needed to accomodate a special version of the model. Consider how will you display your model when finished. Make a list of the materials you will need: paint, cement, decal setting solution, thinner and tools.

By the time I got the money to buy the extra stuff, the balsa had been stepped on numerous times and what was left was broken and unrecognizable.  Why did they make that stuff so flimsy anyway?

I had a thing about building model airplanes when I was a teenager 6 decades ago.  In those days, you carved the parts from balsa wood according to a template.  Then somehow or another, you were supposed to stretch this very thin paper over the glued together parts.  Next, you were supposed to dope the paper, (Put this goop stuff that looked like paint on the paper.)  This was supposed to stiffen the paper or make it rigid and smooth.  That was the point where I always stalled out or crashed.  I don't know how much of my paper route money I wasted attempting these projects.

At any rate, it seems to me, model plane building has gotten a lot simpler now and a lot more expensive.  My son built about 3 RC models and I think he probably has over $1000 invested in them.  They now languish in a corner of his messy garage.

I have never figured out where I went wrong in my building efforts.  Anyone have any suggestions?